MX8-amp

Initially designed for multi-purpose applications, the coaxial technology has demonstrated numerous advantages over classic two-way systems which typically suffer from interference around the crossover point, resulting in lobing, uneven frequency and power response.

The MX8-amp Series deliver a complete sound reinforcement solution to fulfill the highest demands of audio professionals for both the fixed installation and rental production markets. The MX8-amp delivers ultimate sonic performance in a compact and multi-purpose package. The MX8-amp built-in electronics package features a new lightweight, two channel class D audio power amplifier designed specifically for Self-Powered products. The amplifier module is a sophisticated switch mode power supply, class-D amplifier design capable of delivering more than 2 x 500W RMS into 4 ohms and adding only 3Kg to the weight of the cabinet.

Key features 
  • Coaxial design
  • Point source
  • High efficiency
  • Low distortion
  • Self-Powered
Specifications 

ACOUSTICAL

Frequency response (1):  78Hz - 20'000Hz +/-3dB

Maximum peak SPL (2):   123dB

Coverage: 100° Conical

 

TRANSDUCERS

Low frequency :   8 inch, long excursion, low distortion cone driver

High frequency:   2 inch diaphragm compression driver, loaded with asymmetrical horn

 

AMPLIFIERS

Output power (CH1) (5):   500W (EIAJ-1KHZ, 1%THD)

Output power (CH2) (5):   500W (EIAJ-1KHZ, 1%THD)

THD, DIM, SMPTE:   <0,05%

 

AUDIO INPUT

Type:   Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   electronically balanced 10k Ohms

 

AC POWER

Connectors:   POWERCon TRUE1

Input voltage (EU):   115V - 250V AC

 

MECHANICAL

Cabinet size (WxHxD):   460 x 260 x 290mm

Cabinet finish:   Black textured

Protective grill:   Removable hex. perforated steel grill

Weight:   9Kg

 

 

(1) Frequency response: +/- 3sd, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 4 ohms, both channel driven

Acoustical 
  • Frequency response (1):  78Hz to 20'000Hz
  • Maximum peak SPL (2):  124dB
Transducers 
  • Type:                                    Coaxial
  • Low frequency driver:      8 inch, ferrofluid cooled, long excursion cone driver
  • HF compression driver:    1 inch pur titanium diaphragm
  • Dispersion:                          100° Conical
Amplifiers 
  • Output power (CH1):   500W@4ohm (EIAJ-1KHZ, 1%THD)
  • Output power (CH2):   500W@4ohm (EIAJ-1KHZ, 1%THD)
  • THD, DIM, SMPTE:   <0,05%
Audio Input 
  • Type:   Differential balanced input circuit
  • Connectors:    Female XLR Left & Right
  • Nominal impedance:   electronically balanced 10k Ohms
AC Power 
  • Connectors:   POWERCon TRUE1
  • Input voltage (EU):   115V - 250V AC
DSP 
  • Sampling rate:   96 Khz
  • Basic delay:   0.76 ms
  • Dynamic range:   115 dB
Mechanical 
  • Cabinet size (WxHxD):    294 x 260 x 260mm
  • Cabinet finish:                  Black polyurethane coating
  • Protective grill:                Removable perforated steel, foam cover inside
  • Weight:                              9Kg
Elements & Accessories 
  • MX8 U-Bracket
  • SUB28-amp
Pdf 
Galerie 

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven