MP12-amp

The MP12-amp loudspeaker is a powered system that combines exceptionally accurate reproduction with high SPL output in a very compact multi-purpose enclosure available as mirror symetrical left-right, to form pairs. 
The MP12-amp uses a proprietary 12 inch cone low frequency driver mounted in a vented enclosure with carrying handles. The high frequency unit is a 2 inch diaphragm high frequency compression driver couple to a in house designed 40°/90°x 60°asymmetrical horn. 
A unique Active Speaker Output, ASO, allows the user to connect a slave unit called MP12-S in paralell to the MP12-amp.

Key features 
  • High power
  • Self powered
  • Monitor & FOH presets
  • Active speaker output ASO
  • Ethernet Networking
  • PC remote controlled
Specifications 

Keep empty

Acoustical 

Frequency response (1):   55Hz - 20KHz

Phase response:   350Hz - 10KHz +/- 45°

Maximum peak SPL (2):   131dB

Transducers 

Low frequency:     1x 12", long excursion, ferrofluid cooled

High frequency:    1x 2" diaphragm, ND compression driver, ferrofluid cooled, loaded with asymmetrical horn

Amplifiers 

Output power (low1) (5):   1'250W (EIAJ-1KHz, 1% THD)

Output power (low2) (5):   1'250W (EIAJ-1KHz, 1% THD)

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Analog Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   10K Ohm

AC Power 

Connectors:   Female PowerCon, in; Male PowerCon loop

Input voltage:   115V - 250V nominal +/- 10%

DSP 

Sampling rate:   96 KHz

Basic delay:   0.76 ms

Dynamic range:   115dB

Remote / Network 

Type: Ethernet

Connectors:    RJ45 female, RJ45 loop

Mechanical 

Cabinet Size (WxHxD):   698 x 360 x 365 mm 

Cabinet finish:   15 & 18mm plywood, black epoxy painted, other colors on request

Rigging:   Aircraft L-track fittings on the sides
                35mm tube stand adaptor

Protective grill:   Removable perforated 1,6mm steel, foam cover inside

Weight:   25Kg

Elements & Accessories 
  • SUB3-amp
  • SUB400-amp
  • SUB800-amp

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven