SK-F amp
The SK-F-amp loudspeaker is a powered version of the SK loudspeaker system which is a fully horn loaded compact cabinet made for application where directivity and power are of importance. The SK-F-amp uses a proprietary 12 inch low frequency cone driver, a 8 inch mid frequency cone driver and a 1 inch high frequency driver loaded with a CD horn. All drivers are mounted in the same horn to form a unique power source point with very precise directivity of 45°x 50° (H x V) down to 300 Hz. The SK-F-amp is easily arrayable with its 9,5° trapezoidal shape and L-track rigging flying hardware. The SK-F-amp built-in electronics package features a new lightweight, two channel class D audio power amplifier (D2SP) designed specifically for Self-Powered products.
- High efficiency
- Medium throw
- Arrayable
- Compact
- Self powered
- Ethernet
- PC remote controlled
Keep empty
Frequency response (1): 60Hz - 20KHz
Phase response: 350Hz - 10KHz + / - 45°
Maximum peak SPL (2): 140dB
Directivity: H 45° x V 50°
Low frequency: 1 x 12", ferrofluid cooled, long excursion
Nominal Impedance: 8 Ohms
Mid frequency: 1 x 8", ferrofluid cooled, low distortion
Nominal Impedance: 16 Ohms
High frequency: 1 x 2" diaphragm ferrofluid cooled compression driver, loaded with CD horn
Nominal Impedance: 16 Ohms
Output power (low) (5): 1'250W RMS
Output power (Mid-High) (5): 1'250W RMS
THD, DIM, SMPTE: <0,05%
Type: Analog Differential balanced input circuit
Connectors: Female XLR; Male XLR loop
Nominal impedance: 10K Ohm
Connectors: Female PowerCon, in; Male PowerCon loop
Input voltage: 115V - 230V nominal +/- 10%
Sampling rate: 96 Khz
Basic delay: 0.76 ms
Dynamic range: 115dB
Type: Ethernet
Connectors: RJ45 female, RJ45 loop
Cabinet Size (WxHxD): 547 x 825 x 630 mm
Cabinet finish: 15 & 18mm plywood, black epoxy painted, other colours on request
Rigging: Aircraft L-track fitings, front and back
Protective grilI: Removable perforated 1,6mm steel, foam cover inside
Weight: 52Kg
- LM3-F-amp
- SUB3-amp
- SUB800-amp
- SUB1000-amp
- SK-F-Trolley
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven