EK12

The EK12 is a compact 2 way passive system that employs a single AP-12” low frequency driver mounted in a B-6 type vented enclosure. The high frequency unit is a one inch ferro fluid cooled driver coupled to a 40°/90°x60° AP asymmetrical horn. The system incorporates a low loss 2 way passive filter designed for flat frequency response and optimal phase alignment.

The EK12 comes with a 35mm tube adapter and its multi-angle design allows you to use the EK12 in a variety of applications.

Key features 
  • Asymmetrical horn
  • High efficiency
  • Low distortion
  • Processor controlled
Specifications 

Keep empty

Acoustical 

Frequency response (1):  55Hz - 20'000Hz  +/- 3dB

Maximum SPL peak (2):   131dB

Coverage: 40°/90° by 60° (4 positions)

Transducers 

Low frequency:   12 inch ND long excursion, low distortion cone driver

High frequency:   2 inch diaphragm ND compression driver, loaded with asymetrical horn

Nominal Impedance: 8 Ohms

Power handling: 500W (AES) (4)

Connectors:   2 x Neutrik Speakon NL4MP (wired in parallel)

Mechanical 

Cabinet Size (WxHxD):   690 x 360 x 385 mm

Cabinet finish:   12 &15mm plywood, black textured

Rigging:   11x M8 screws, one 35mm K&M tube stand adapter

Protective grill:   Hexagonal perforated 1.6mm steel grill covered with charcoal grey foam.

Weight:   21Kg

Elements & Accessories 

All the Subwoofer range

Pdf 
Galerie 

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven